Compatiblity Test: RhinoShield PlayProof Case vs 3D Edge to Edge Tempered Glass Protectors November 30 2015, 0 Comments



RhinoShield PlayProof and Edge to Edge (E2E for short) Tempered Glass Protectors Compatibility Test

Due to the diverse variety of glass protectors on the market, we decided to start off this Q&A with the few most popular brand discussed on our FaceBook Fan Page.

imos 3D Edge to Edge Corning Tempered Glass Protector

Hoda 2.5D Corning Tempered Glass Protector

RhinoShield PlayProof + imos 3D E2E Glass Protector Compatibility Test,(Actual test photos)


Note: During testing, we have discovered that you must wait for the adhesive on the temper glass to dry completely before installing the case or else air bubbles might form.  The drying process may vary depending on the individual phone.  It is very crucial to wait for the adhesive to dry completely beforehand. As shown on the picture above, there is no formation of air bubble at all. 

RhinoShield PlayProof  case + Hoda 2.5D Glass Protector Compatibility Test,(Actual test photo)

RhinoShield PLAYPROOF for iPhone 6S Actual Test Q&A

Q1: Is the lip of the case taller than the screen?

A: Yes, the shock-absorbing material covers along the curve of the device and the lip is high enough that it will not touch the table surface. 

Q2: Is the case taller than the camera?

A: PlayProof is elevated so that the lens will not be scratched by dust or dirt on table surfaces

Q3: Is the lightning port large enough for third party cords?

A: Any certified MFI cable can be used through the wide port cutout. We have tested the moshi cable in this case.

Q4:  What if I already have skin installed on my phone?

A: Judging from our testing reference, all of them will fit.  But due to the difference in every skin quality and thickness, it is advised to ask your provider for more information. We have tested one of the most popular skin brand, DBrand, and we can confirm 100% compatibility between Dbrand and Rhino Shield (both Playproof iPhone case and Crashguard Bumper). 

Close-up shot of the Honeycomb structure

For more product information, click the link here

Want to see more customized designs of PlayProof?  Click below!

iPhone 6/6S

iPhone 6 PLUS /6S PLUS  

For questions and thoughts, comment below or ask on our FaceBook Fan Page, or you can write to us at

RhinoShield PlayProof has also been tested with the following screen protectors but the Pics was not shown in this blog:

AmazonBasics Ultra-Clear High Definition

Anker GlassGuard

Arcadia protector

Armorz Stealth Extreme Lite

Baseus .3mm Arc

Belkin TrueClear InvisiGlass

Beluga Tempered


B-Noble 3D

BodyGuardz Pure Premium

BooBoo Protector

Cupert Cinder

Daswise Protector

Dodosmith screen protector

eclipse OPTIK

E-JOY 0.15mm

Godosmith's Ice Max 3D

HoDa 3D

HoFi "premium 0.26MM tempered glass

Icarez Glass

iFlash Premium

iLoome Screenmate Max

iMos 3D


IVSO Tempered Glass

JETech Full Screen Premium Tempered Glass

JOTO protector

Just Mobile AutoHeal Self-Healing

Lab C 0.2MM

Maxboost tempered glass

Mime Ghost Glass

Moshi iVisor Glass

NewTrent Trenti 6L

Nillkin Tempered

Obliq Zeiss Pure Xtreme Glass

Otterbox Alpha Glass

Patchwork ITG MAX Impossible

Screen Protectors UK

Skinomi TechSkin

Spigen Glas.tR SLIM

Spigen Steinheil Flex HD

Tech Armor Premium HD Clear Ballistic Glass

Tech Armor Retina

Tempered diamond glass protector

Tempered glass protector

Tzumi ProGlass Premium HD

Volt Screen Protector

Xtreme Guard Full Body

ZAGG InvisibleShield Luxe Glass

Zeos Glassy 3D

Zlate Shield


Leave a comment

Comments have to be approved before showing up